Spent the good part of Tuesday night in downtown Baltimore at the Light City Baltimore event. This is just one day of many I plan on being down there for this event. Most of the displays are around the Inner Harbor in Baltimore, but some are also spread around the city. See the Light City Baltimore website at lightcity.org/ for details of what is where.
This first night I started out on Federal Hill to get the wide view of downtown and then slowly made my way up towards the Light St Pavilion. This is not even 1/2 way around the event. I took my time and in many situations, as I had to be very patient to get the shot I wanted. I will say I didn’t see as many photographers as I expected, but then again I haven’t seen all the displays yet and some of the more interesting displays are in areas I will go to on Thursday.
I’ve got many pictures to go through and process, but here is just a sampling of first the two I’ve processed quickly for you.
The Ferris Wheel
The Ferris when by Rash Field and the Maryland Science Center. My first attempt at doing this kind of photo. I think it turned out pretty well.
I had a pretty productive day shooting the Cherry Blossoms around the Tidal Basin in Washington DC. Spend pretty much the entire morning down there and walked the entire basin.
It is taking a bit longer to edit the photos as after coming home I discovered I must have dirt on my sensor or somewhere in the camera. So it is taking me a bit longer to edit them as I have to clean the dirt spots of each picture. Although there is software out there that can remove the spots it is always best to make sure your camera is clean before your trip. In my case I did check out the sensor and cleaned the lens before this trip, but either the dust is very small on the sensor or I had dirt on my ND filter. I’m going to re clean everything and see if I can figure it out and do some test shots to see if I got it clean.
Washington Monument and the Cherry Trees
The Cherry Trees along the Tidal Pool with the Washington Monument in the background.
One of the first shots I got during the day and turned out as one of the better shots I got during the day. It is from the bridge on the way to the Jefferson Memorial.
Making the trip down to Washington DC to take pictures of the Cherry Trees that are now in full bloom along the Tidal Basin.
This year I’m attempting to arrive before Sunrise, but we will see how that goes. For those who know me, getting up at 4am to make the trip is the middle of the night for me. So this might be a bit rough in the morning and will have a nice supply of coffee to keep me away.
If you want to see what I get this year, check back here or visit my Facebook page at https://www.facebook.com/markdoddphotography/ Be sure to like the Facebook page so you can get notified of the posted pictures and any live videos that I do.
If you are planning on going here are a few tips.
Arrive around sunrise if you can to avoid the crowds. But even this early there will be people there.
Take public transportation. Parking is already tight on a normal day, but even more so during this time, so public transportation is the best way to get there.
If taking Metro, the Smithsonian is about the closest stop to the Tidal Basin.
Weekdays are best, but the weekend is crazy packed with folks enjoying the trees.
Washington Monument through the Cherry Trees
This is one of the photos I took on my trip last year. It was a weekday trip, but I didn’t get down there until the afternoon. Even though it was a weekday, people were everywhere enjoying the view.
Although I did like it, something was not quite right. I had taken it on my tripod at the lowest height setting I could use. After someone commented on my Facebook page that they thought the hands were too close to the edge of the photo I realized that was what was bugging me about the photo.
Since I do not have a super wide-angle lens what was I going to do. My widest lens is a 18mm-135mm and that is the lens I used for this photo and was already at the widest setting of 18mm. I thought about it for a few days and decided I’d go back and just set the camera on the floor.
So yesterday I went back, set the camera on the floor and got ready to take a few photos. I’ve done this kinda thing before with sheer guesswork and multiple attempts. Take the photo, pick up the camera, check the image and repeat until I got what I was looking for. This takes forever and there is no sure way to know if I got the shot until I picked up my camera and took a look at what I just shot. Not to mention that you had to remember where the camera was when you picked it up so you knew where to place it when making an adjustment.
My camera does not have a flip screen or wi-fi, so I had no way to view the image live. Also it is inside and my camera doesn’t have a high enough ISO to let me hand hold it and get a noiseless photo without using a flash, which would destroy the look. What else was I going to do.
Then I started thinking. I have a cell phone, it has a forward facing camera so you will see on the screen what it is pointing to. Can I use this to see what I would see through the viewfinder. Turns out the answer is yes. I placed the camera on the floor, slide my cell phone under the viewfinder so the lens is lined up with the viewfinder, and low and behold, I could see on the screen what the viewfinder was showing.
Here is the picture of the setup on the floor at the base of the statue.
I did have to use my lens cap to prop up the right side of my camera to make it level. So if you are going to do something like this, have a few small items that are the same thickness as your cell phone just in case you need to prop one side of you camera up like I did. I lucked out in that my lens cap was the same thickness as my cell phone
Here is of one of the photos I took with this setup. I think it turned out rather well with much more space between the hands and the edge of the frame and showing much more of the dome itself.
The Statue of Jesus in the Billings Building of Johns Hopkins Hospital
I do have a Black and White version that is colorized like the first photo on my store page so be sure to check that one out as well.
One of my favorite artist/photographers is Trey Ratcliff of StuckinCustoms.com. He is well-known for his amazing travel photography and easy to follow tutorials, not to mention the co-creator of Aurora HDR.
This time he is doing something a little different. This seems it is a much more personal tutorial series and looks like he gives insights on what inspires him, how he became to be the artist that he is, and details on how he creates his work. All of this was taken in Africa and you’ll get to see some great images along the way.
I’ve like his earlier tutorials and own a few and just wanted to mention this one now before the price goes up.
You can watch his trailer for the series below to see if this might be something you are interested in. There is a link below the video to go to his store to see the detail information on what you get in this series.
My primary photo editor is now Aurora HDR that was developed by Trey Ratcliff of Stuck in Customs in collaboration with Macphun. If you do HDR photography I would say this is the best program to use for that.
Macphun makes a whole series of photography apps in addition to Aurora HDR. When I’ve taken a single photo instead of the multiple brackets that you need for HDR photography I sometimes use the Macphun apps of Intensify and Noiseless CK to do select edits, but they do have an entire suite that you may like.
Check out the complete line of Macphun software. Click on their logo below to visit their site.
And don’t forget you can get 10% off any of their products using my coupon code
A recent photo edited with Aurora HDR
This is my photo of the Johns Hopkins Hospital Billings Building also know as the Dome.
I know it needed a little punch added to it so I brought it into Aurora HDR, the Macphun/StuckinCustoms application. Click the slider to compare the 2 photos of the original iPhone image and the edited image from Aurora HDR. It didn’t need much adjustment, but you see the possibilities especially in the sky.
Seems it is my day for finding free stuff for you that I think you can use. This offer is for ON1 Photo Effects. It is for both Mac and Windows.
I already own and use the full ON1 Photo 10 software and it is one of my secondary photo editing software packages, so this offer doesn’t benefit me.
But for those of you looking for a great app to add some punch to your photos or fix some issues with your photo, I recommend it. And you can’t beat the price of $0.00
So go and download it now before they change their minds. You can get by clicking on the following.
I would check out their other software while your there and they do offer other items for free. Check the complete list out under their “Free” menu
They also have some great videos so you can the most out of their products.
Macphun announced a Free Essential HDR Course today that is using Aurora HDR in the course.
So if you have thought about using Aurora HDR or just looking into improving your HDR experience go ahead and sign up. Hey, it’s free!!
But First…..
If you don’t already have Aurora HDR, click the image below for the Stuck in Customs store where you can either buy Aurora HDR if you already know you want it, or at the bottom of the page you can download a trial version that you can use while you are taking this course.
Now that you have the software let’s get you to the course
